I beam

Short Description:

HOT-DIP GALVANIZED I-BEAM is also called hot-dip galvanized I beam or hot dip zinc beams are immersed after rust steelh-500 degrees Celsius melts in zinc, beams attached to the zinc layer on the surface, to serve as an antiseptic purposes, suitable for all kinds of acid and alkali mist and other corrosion environments.


Product Detail

Product Tags

HOT-DIP GALVANIZED I-BEAM is also called hot-dip galvanized I beam or hot dip zinc beams are immersed after rust steelh-500 degrees Celsius melts in zinc, beams attached to the zinc layer on the surface, to serve as an antiseptic purposes, suitable for all kinds of acid and alkali mist and other corrosion environments.

Size

Weight

Dimensions(mm)

kg/m

h

B

T

I 100×68

11.26

100

68

4.5

I 120×74

13.99

120

74

5.5

I 140×80

16.89

140

80

5.5

I 200×100 a

27.9

200

100

7

I 200×100 b

31.1

200

100

9

I 200×100 c

33.1

200

100

7.5

I 240×116

37.5

240

116

8

I 270×122

42.8

270

122

8.5

I 280×124

47.9

280

124

10.5

I 300×130

57.5

300

130

13

I 320×134

62.8

320

134

13.5

I 360×140

71.3

360

140

14

I 400×142

67.6

400

142

10.5

I 500×160

101.5

500

160

14

I 550×170

122.6

550

170

16.5


  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • stainless steel pipe

      stainless steel pipe

      FLAT BAR is the steel whose cross sections rectangle and slightly blunt edge. It could be the finished steel. Also could be used to welded tube billet and packing rolling sheet with thin slab, it could be used to hoop iron, tools and mechanical parts, in the architecture used to room ram structure, ladder and etc. when it is fished steel. Packing In bundle or as customer’s requirements Bundle weight About 2 tons MOQ 2 tons each size Delivery Time 15-20 days after receiv...

    • anti-finger GL galvalume steel coil for roofing sheets

      anti-finger GL galvalume steel coil for roofing...

      55% AL-ZN COATED STEEL COIL is a steel substrate coated on both sides with an aluminum-zinc alloy with the composition of the coating, 55% aluminum, 43.4% zinc and 1.6% silicon. The excellent corrosion resistance of Aluzinc is a result of the properties of the two metallic substances: the barrier effect of the aluminum existing on the surface of the coating and the sacrificial protection of zinc. Thickness Range 0.14 mm – 2.00 mm Width Range 600 mm – 1250 mm ...

    • cold rolled steel coil cold rolled full hard steel hard

      cold rolled steel coil cold rolled full hard st...

      >>Description of Cold Rolled Steel Coil (CRC) COLD ROLLED STEEL COIL is produced by pickling hot-rolled coil and rolling it uniformly at an appropriated temperature to a thinner thickness. It has excellent surface configuration and superb mechanical properties for use in automobile and electronic appliance production. Standard Specification JIS G 3141:2005 SPCCT-SD SPCD-SD, SPCE-SD, SPCF-SD, SPCG-SD ASTM A1008 CS TYPE A /B/ C DS TYPE A /B, DDS EDDS EN...

    • water drainage plastic PVC flared pipe

      water drainage plastic PVC flared pipe

      PVC pipe is widely used in industrial and civil building, including indoor and out door drainage, sewage pipe project, agricultural irrigation system, chemical drainage, sewage, it also suitable for ventilation pipe and drainage pipeline, etc. Technical parameter: Flaring pipe (With apron) S、SDR nominal outside diameter (mm) wall thickness (mm) nominal pressure 0.63MPa S16 SDR33 63 2.0 75 2.3 90 2.8 S20 SDR41 110 2.7 125 3.1 140 3.5 160...

    • fireproof soundproof thermal insulation glass wool with aluminum foil

      fireproof soundproof thermal insulation glass w...

      Centrifugal glass wool is a filamentous material made of molten glass fiberized by a centrifugal blowing process and sprayed with thermosetting resin, and then subjected to thermal curing and deep processing, which can be made into a series of products with multiple uses, such as glass Cotton board, fiberglass duct, air conditioning board, high temperature glass wool, etc. >>Product performance and standards: 1.Thermal insulation, sound absorption and noise reduction 2. Good thermal st...

    • class1 class0 NBR PVC rubber foam compound thermal insulation material

      class1 class0 NBR PVC rubber foam compound ther...

      The compound insulation material, using special technology to make the polymer “aluminum foil” metal composite layer and rubber-plastic insulation material closely combined, comprehensively improve the performance indicators of rubber-plastic insulation materials. Compound insulation material has become an ideal choice for applications in many special fields. It is widely used in harsh environments such as food production workshop, pharmaceutical factory, electronic factory, clean...